Compact, portable ultrasonic units for hand assembly operations such as spot welding, staking and inserting.

Cosmo System Corporation
HomeProductsAbout usNewsContact us
Home > Products > Ultrasonic Plastic Welders / Hand Held Welders
Compact, portable ultrasonic welder is suitable for spot welding, staking and inserting.
Weld by digital time and/or energy with Sonicsf 500 watt ultrasonic hand held welding systems for manual assembly operations, such as spot welding, staking and inserting.
Available in 20 and 40 kHz frequencies, these lightweight hand guns feature autotuning, programmable time, energy or continuous duty welding modes and digital amplitude control.

20kHz H520
Model: H520
Main features of H500 series
- Light weight tool with 680g
- Digital timer control
- Energy control is available with H500-E series
- Digital amplitude control
- Output power indicator
- Auto tuning function
- Load reguration
- Over load protection
- DB9 PLC I/O connector
40kHz H540
Model: H540
Data sheet of H500 series
Model H520T H520E H540T H540E
Time Control Available
Energy Control N/A Available N/A Available
Auto Tuning PLL auto tuning
Amplitude Control Digital control (20-100%)
Frequency Display Available
Power Display Available
Input Power AC110V (50/60Hz)
Converter Size Dia.48.3 x L193mm Dia.48.3 x L160mm
Converter Weight 680g 680g
Generator Size (W)190 x (D)340 x (H)216mm
Generator Weight 5.9kg
Optional Accessories
Hand press Hand Press
A manual press is available for assembling parts where production volume does not justify automated equipment. The press provides more controlled motion of the converter than is possible when holding the converter by hand, resulting in more consistent assemblies. This unit includes adjustable cam switch actuation. An optional plug-in foot pedal is also available for foot switch activation.
pistol grip Pistol Grip
A Pistol Grip is available for the model CV55 and CVG54 hand held converters and is designed to provide more ergonomic handling of the unit for certain application demands. The Grip is a lightweight device that simply attaches to the converter and allows the operator to activate the ultrasonics by pulling on the gtrigger.h
Stapler Stapler
A lightweight stapler attachment is available for the CV55 20 kHz hand held converter and is ideally suited for sealing low production rate clamshell packages. The stapler is designed with a special pivoting mechanism that is attached to the converter. This mechanism contains a steel anvil that applies pressure to a small area on the flanged outer edge of the clamshell package. The anvil is supplied with two sealing patterns: a medium diamond knurl and a coarse diamond knurl. To switch from one sealing pattern to the other, the anvil is rotated 180‹.

contact us

Home- Site Map - Japanese Page Home
Copyright (C) Cosmo System Corporation. All right reserved.